HobbyKing
EDF55 WITH 4300KV MOTOR ASSEMBLED
Motor | Brushless outrunner 2323 |
Current | 10A |
Thrust | 400g+ |
Power | 170W |
Weight | 56g |
Inner Diameter | 56.42mm |
Outer Diameter | 68.54mm |
3 Reviews
HobbyKing
FUTABA 7C 2.4GHZ HELI W/R617FS RECEIVER (MODE 2)
Specifications | Transmitter; |
Power Supply | 9.6V |
Current Drain | 170mA |
Size | 1.6 x 1.1 x .35" (40 x 27 x 9mm) |
Power Requirement | 4.8 - 6V |
Current Drain | 80mA (at no signal) |
Features:, Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies, Weight: 7g, Includes:, Futaba 7C 2.4GHz Transmitter,
Dual antenna diversity enables FASST system to automatically and seamlessly ...5 Reviews
HobbyKing
FRSKY D8R-II PLUS 2.4GHZ 8CH RECEIVER WITH TELEMETERY
Compatible with FrSky two way telemetry modules | DFT, DJT, DHT, DHT-U |
Operating voltage | 3.5~10.0V |
Power consumption | 100mA |
Resolution | 3072 |
Analog voltage | 0~3.3V |
Range | 1.5km-2.5km |
Dimensions | 55 x 25 x 14 mm |
Weight | 12.4g |
Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Compatibility:, Receiver Specification:, Number of channels: 8,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
FUTABA R616FFM 2.4GHZ FASST 6 CHANNEL MICRO AIR/HELI RECEIVER
Power requirment | 4.8~6.0V |
Dimension | 39 x 23 x 7.9mm |
Weight | 6.3g (0.22oZ) |
Battery F/S voltage | 3.8V |
Specifications:,
R616FFM 2.4Ghz FASST 6-Channel Micro Parkflyer Receiver from Futaba. It ...5 Reviews
HobbyKing
HOBBY KING GT-2 2.4GHZ RECEIVER 3CH
Model | Car/Boat |
Channels | 3ch |
Frequency band | 2.4Ghz |
Modulation | GFSK |
Sensitivity | 1024 |
RF. receiver sensitivity | -100dbm |
Fail Safe | Yes |
Power | 4.5~6VDC |
Antenna length | 26mm |
Size | 37.6 x 22.3 x 13mm |
Specification:, Weight:5g,
Hobby King GT-2 2.4Ghz Receiver 3Ch CE & FCC certified5 Reviews
HobbyKing
A28L BRUSHLESS OUTRUNNER 920KV
Voltage | 10v |
Current | 11.5A |
Prop | EP1047 (GWS) |
Thrust | 680g |
Power | 115W |
5 Reviews
HobbyKing
HK-500GT 3D ELECTRIC HELICOPTER KIT (INCL. BLADES AND EXTRAS)
Length | 840mm |
Height | 310mm |
Main rotor diameter | 970mm |
Tail rotor diameter | 200mm |
Motor pinion gear | 13T |
Main drive gear | 162T |
Tail drive gear | 31T |
Weight(without power system) | 1370g |
Flying weight | Approx 1700g |
Servos | See linked items below. |
Radio Gear | Gyro/Rx |
ESC | 80A or greater. |
Battery | 2 x 2200mAh 3S 20C or greater. |
Specification:, Drive gear ratio:1:12.46:4.68,
The high performance HK-500GT is 3D flight ready. 99% of ...5 Reviews
HobbyKing
FRSKY V8R4-II 2.4GHZ 4CH RECEIVER
Operating voltage | 3.0~16.0V |
Power consumption | 30mA |
Resolution | 3072 |
Latency | 22ms |
Range | >1000m |
Dimensions | 36x17.5x8mm |
Weight | 3.5g |
Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 4,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
KB45-11XL 1000KV BRUSHLESS INRUNNER
Weight | 557g |
Shaft | 6mm |
Size | 77x45mm |
Voltage | 36v |
Highest rated power | 2592W |
Kv: 1000RPM/V,
KB45-11XL 1000kv Brushless Inrunner This size motor will fit our ...5 Reviews
HobbyKing
TURNIGY INFRARED THERMOMETER (-33 ~ 220CELSIUS)
Measuring Range | -33~220C (-27.4~428F) |
Operating Range | -10~+50C (14~+122F) |
Full Range Accuracy | +/- 2.5C, 2.5% |
Distance | 2~40cm |
Emissivity Range | default 0.95 Adjustable 0.05(5E) to 1(100E) |
Wave Length | 5um~14um |
Power Supply | CR2032 |
Spot Range: 1:1 (1mtr distance measures 1mtr spot size),
The Turnigy temp checker now handles temp up to 428F! ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 6000MAH 6S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance! Turnigy Nano-Tech High discharge batteries & deliver full capacity as well as being the best value batteries in the hobby market today!Spec.Capacity: 6000mAhVoltage: 6S1P / 6Cell / 22.2VDischarge: 25C Constant / 50C BurstWeight: 908g (including wire, plug & case)Dimensions: 167x49x55mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet-connectorSuited to the following models: MIKADO LOGO500/500SE, ALIGN T-REX600 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually d,
5 Reviews
HobbyKing
TURNIGY NANO-TECH 4000MAH 3S 45~90C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-tech's are the real deal, delivering unparalleled performance! Spec.Capacity: 4000mAhVoltage: 3S1P / 3 Cell / 11.1VDischarge: 45C Constant / 90C BurstWeight: 375g (including wire, plug & case)Dimensions: 164x62x23mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet-connector,
5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/FUTABA
Dimension | 28.5 x 26.5 x 11mm |
Power supply | 4.8~6V |
Current drain | 30mA (At 4.8V) |
Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
HK2839 EDF OUTRUNNER 2800KV FOR 70MM
Specs | Kv- |
Dimensions | 64 x 28mm |
Shaft diameter | 4.0mm |
Shaft length | 15mm |
Voltage | 14.8V |
Weight | 95g |
Output Power | 550w |
Max Current(<60s) | 36A |
Thrust | 1200g(42.33oz.) |
Recommended model weight | 800-1200g |
Recommended model fans | 70mm Fans |
Mounting Hole Bolt Circle | 18mm & 20mm |
Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
C2028 MICRO BRUSHLESS OUTRUNNER 1400KV (22G)
Diameter | 20.2mm |
Length | 28mm |
Shaft | 5mm |
Weight | 22g (with 10cm wire) |
Power | 90W |
Resistance | 573 |
Idle Current | .2A |
Max amp | 12A (15sec burst) |
Voltage | 2-4cell Lipoly |
Kv: 1400rpm/v, Turns: 20,
Specifications. We do not have a suggested prop size for ...5 Reviews